SECULIFE DF BASE / PRO
SECULIFE DF BASE used for functional testing of external defibrillators.
The delivered energy is measured by a built-in simulated load similar to the human body (50 ohms). Furthermore, rapid and immediate viewing and selecting of the desired ECG signal types and test data is possible.
Features and Highlights
- Quick selection of the desired ECG signal types and test data
- Retrieves information about defibrillation
- Monophasic and Biphasic compatible
- Test for shock algorithm
- Measurement outgoing energy
- Fully AED Compatible
- Monophasic, biphasic and biphasic pulsed energy measurement
- On-screen viewing of Defibrillator Waveform
- Cardioversion delay measurement
- Capacity 5000 V, 1000 Joule
- Charge time measurement
- 10 Universal patient lead connectors
- Full remote operation via RS232
- Memory for 50 individual test sequencies
- Centronics printer interface
- 9 Volt Battery power, low battery indicator
- Flash programmable for upgrades
SECULIFE IF PRO
Infusion Pump Analyzer for all Essential Quantities
Features and Highlights
- User swappable fully self contained flow modules
- Calibration in flow modules
- No need to be down for calibration or service
- Performs all IEC 60601-2-24 required tests
- Configurable pressure (mmHg, PSI, Bar, kPa)
- Smooth dual syringe system
- High accuracy (up to 1%)
- PCA / Bolus
- Back pressure simulation
- Occlusion alarm
- Trumpet curve analysis
- User-selectable test limits
- Built-in auto test sequences
- PC compatible
- 1, 2, 3 and 4 channel models available (field upgradeable)
SECULIFE IF+
Infusion Pump Analyzer for Flow
Features and Highlights
- Easy to Use
- Easy to Clean
- Simultaneous Operation of T wo Chambers
- Large Graphics Display with Cursor Selection of Options & Setup of Parameters
- Auto Chamber Recognition
- 2 Chamber Sizes (3.5 & 35 mL)
- Out-of-Sequence Sensing
- Battery Display (0 to 100%)
- Ranges 0 to 999.9 mL/hr & 0 to 9999 mL/hr
- ±1% of Reading Flow A ccuracy
- Digital Calibration - No Pots to Turn
- Replaceable Tubes
- Sealed Level Sensors
- Programmable End of Test Audio
- Programmable Auto or Manual Test Start
SECULIFE DP BASE
Precision Digital Measuring Instrument for Pressure Measurement
Measuring ranges:
- 13.50 to 100.00 psi
- 701 to 5190 mm Hg at 20 °C
- 951 to 7043 cm H2O at 20 °C
- 374 to 2773 inches H2O at 20 °C
- ± 0.1% pressure measuring accuracy
- 5 digit LCD display
- Programmable digital filter
- Digital calibration and zero adjustment
- Male Luer connector
- Pressure measurement in liquids and gases
- Min-Max capture function
- RS 232 port
SECULIFE DP PRO
Precision Digital Measuring Instrument for Pressure Measurement, Configurable
Measuring ranges:
- psi, mm Hg at 0 / 20 °C, in Hg at 0 / 20 °C,
- cm H2O at 20 °C, in H2O at 4 / 20 °C, in H2O at 60 °F,
- kg/cm2, kPa, mBar, bar
- 2 selectable pressure measuring channels
- 0.3, 5, 10, 75, 100 psi
- Temperature option: YSI 700 or RTD 100
- 24-bit measuring depth
- ± 0.05% pressure measuring accuracy
- Graphic LCD
- Programmable digital filter
- Digital calibration and zero adjustment
- Quick disconnect connector
- Pressure measurement in liquids and gases
- Min-Max capture function
- RS 232 port
