PresSura Hospital Room Pressure Controllers RPC30
The PresSura™ Room Pressure Controller Model RPC30 is designed to maintain a constant pressure differential in hospital rooms. Backed by TSI’s unique thermal-based pressure sensor, the PresSura products offer the most accurate, precise, and stable measurement available. The Model RPC30 continuously measures room pressure, verifying proper airflow and pressure direction in Airborne Infection Isolation (AII) Rooms, Protective Environment (PE) Rooms, and Operating Rooms (ORs). The Model RPC30 then controls a damper or valve to maintain a safe pressure differential as the specialized room conditions might change. The Model RPC30 can also accept temperature and relative humidity inputs, for complete room environmental monitoring. PresSura Products help hospitals ensure safety for patients and staff.
FEATURES AND BENEFITS
• Audible and visual alarms warn staff of unsafe conditions
• Meets ANSI/ASHRAE/ASHE Standard 170-2008, Ventilation of Health Care Facilities
• Meets the Facility Guidelines Institute (FGI) 2010, Guidelines for Design and Construction of Health Care Facilities
• Meets US Centres for Disease Control (CDC), Guidelines for Environmental Infection Control in Health Care Facilities
• Meets United States Pharmacopeia (USP), General Chapter <797>, Guidebook to Pharmaceutical Compounding – Sterile Preparations
• Accurate pressure measurement based on TSI’s thermal anemometry
• Continuously controls to design pressure set point by modulating a valve or damper
• Accepts measurements from temperature and relative humidity sensors
• Seamlessly integrates into building automation systems via BACnet or Modbus
• Easy-to-read color touch screen display provides simple visual indication of room status
• Accepts key switch to change room mode to neutral/no isolation
• Passwords prevent unauthorized access to monitor functions
APPLICATIONS
• Airborne Infection Isolation (AII) Rooms – Negative Pressure
• Protective Environment (PE) Rooms – Positive Pressure
• Operating Rooms (ORs)
• Compounding Pharmacies
• Pandemic Preparedness Rooms
• Intensive Care Units
• Laboratories and Vivariums
• Burn Units
PresSura Hospital Room Pressure Monitors RPM10
The PresSura™ Model RPM10 Room Pressure Monitor is designed to accurately measure pressure differentials in hospital isolation rooms and operating rooms. Backed by TSI’s unique thermal-based pressure sensor, the PresSura products offer the most accurate, precise, and stable measurement available. These products continuously measure room pressure, verifying proper airflow and pressure direction for both Airborne Infection Isolation (AII) Rooms and Protective Environment (PE) Rooms. PresSura Products help hospitals ensure safety for patients and staff.
FEATURES AND BENEFITS
• Stand-alone room pressure monitor verifies HVAC system operation
• Audible and visual alarms warn staff of unsafe conditions
• Complies with ANSI/ASHRAE/ASHE Standard 170-2008, Ventilation of Health Care Facilities
• Meets the Facility Guidelines Institute (FGI) 2010, Guidelines for Design and Construction of Health Care Facilities
• Meets US Centres for Disease Control (CDC), Guidelines for Environmental Infection Control in Health Care Facilities
• Meets United States Pharmacopeia (USP), General Chapter <797>, Guidebook to Pharmaceutical Compounding – Sterile Preparations
• Accurate pressure measurement based on TSI’s proven thermal anemometry
• Easy-to-read color touch screen display provides simple visual indication of room status
• Seamlessly integrates into building automation systems
• Accepts key switch to change room mode to neutral/no isolation
• Easy configuration via local programming on display
• Passwords prevent unauthorized access to monitor functions
APPLICATIONS
• Airborne Infection Isolation (AII) Rooms – Negative Pressure
• Protective Environment (PE) Rooms – Positive Pressure
• Compounding Pharmacies
• Pandemic Preparedness Rooms
• Intensive Care Units
• Laboratories and Vivariums
• Burn Units
• Laundry Areas, Food Prep, Construction
PresSura Hospital Room Pressure Monitors RPM20
The PresSura™ Model RPM20 Room Pressure Monitor is designed to accurately measure pressure differentials in specialized hospital rooms. Backed by TSI’s unique thermal-based pressure sensor, the PresSura products offer the most accurate, precise, and stable measurement available. These products continuously measure room pressure, verifying proper airflow and pressure direction in Airborne Infection Isolation (AII) Rooms, Protective Environment (PE) Rooms, and Operating Rooms (ORs). PresSura Products help hospitals ensure safety for patients and staff.
FEATURES AND BENEFITS
• Audible and visual alarms warn staff of unsafe conditions
• Complies with ANSI/ASHRAE/ASHE Standard 170-2008, Ventilation of Health Care Facilities
• Meets the Facility Guidelines Institute (FGI) 2010, Guidelines for Design and Construction of Health Care Facilities
• Meets US Centres for Disease Control (CDC), Guidelines for Environmental Infection Control in Health Care Facilities
• Accurate pressure measurement based on TSI’s thermal anemometry
• Capable of monitoring up to 2 isolation rooms and 1 ante room
• Accepts measurements from temperature and relative humidity sensors
• Seamlessly integrates into building automation systems via BACnet or Modbus
• Easy-to-read color touch screen display provides simple visual indication of room status
• Accepts key switch to change room mode to neutral/no isolation
• Easy configuration via local programming on display
• Passwords prevent unauthorized access to monitor functions
APPLICATIONS
• Operating Rooms (ORs)
• Airborne Infection Isolation (AII) Rooms
• Compounding Pharmacies
• Pandemic Preparedness Rooms
• Intensive Care Units
• Laboratories and Vivariums
• Burn Units
SureFlow Room Pressure Controllers 8636
Product Details
The SureFlow™ Room Pressure Controller Model 8636 is an ideal digital controller for laboratories with fume hoods and are designed to actually measure the room pressure differential used to prevent chemical vapors from escaping outside the lab. This controller will modulate supply and general exhaust air flows to maintain laboratory ventilation and the room pressure differential, to comply with standards such as NFPA45-2000 and ANSI Z9.5-2003.
As a stand-alone device, the Model 8636 modulates the supply and general exhaust dampers to ensure proper pressurization. It will also maintain minimum supply volumes for ventilation (Air Changes Per Hour) and cooling and controls the temperature of the laboratory space, by modulating the reheat and the supply air volume
The Model 8636 easily integrates to the building management system using either alarm relays or digital communications. The Model 8636 supports the open MODBUS protocol.
Features and Benefits
• Stand-alone pressure control provides system reliability
• Direct pressure measurement provides continuous, closed-loop control
• Audible and visual alarms warn staff if corrective action needed
• Network communications allow for building-wide control efficiencies
• Convenient keypad and display support local programming
• Passwords prevent unauthorized access to controller functions
SureFlow Adaptive Offset Controller 8682
Product Details
The TSI SureFlow™ Adaptive Offset Controller Model 8682 is an excellent laboratory pressure controller, designed to maintain more exhaust from a laboratory than is supplied to it. This negative air balance helps ensure that chemical vapors cannot diffuse outside the laboratory, complying with requirements in NFPA 45-2000 and ANSI Z9.5-2003.
The SureFlow Model 8682 also controls the temperature of the laboratory space by modulating reheat and the supply air volume. Optionally, a room pressure sensor can be connected to the SureFlow Model 8681 controller to correct long-term changes in the building dynamics.
The Model 8682 easily integrates to the building management system using either alarm relays or digital communications. The Model 8682 supports the open MODBUS protocol.
Features and Benefits
• Integrates temperature control into laboratory ventilation control
• Optional LONworks communications
• Stand-alone room pressure control provides system reliability
• Flow tracking control ensures stability in the HVAC system
• Audible and visual alarms warn staff of unsafe conditions
• Network communications allow for building-wide control efficiencies
• Convenient keypad and display support local programming
• Passwords prevent unauthorized access to controller functions
Applications
• Laboratories
SureFlow Static Pressure Controller 8682-ST
Product Details
The TSI SureFlow™ Static Pressure Controller Model 8682-ST is designed to maintain constant duct static pressure in up to five independent ducts.
The 8682-ST measures the pressure differential using a pressure transducer. It is easily configured to accept different pressure transducer ranges, allowing it to be used for almost any duct.
The 8682-ST will independently modulate dampers or variable frequency drives to maintain the proper duct static pressure in up to five separate systems. If the any of the static pressures are too great or too small, the 8682-ST will activate audible and visual alarms. An adjustable alarm delay avoids nuisance alarms from short-term transient conditions.
The 8682-ST easily integrates to the building management system using alarm relays, an analog output of the measured static pressure, or digital communications. The Model 8682-ST supports the open MODBUS protocol.
Features and Benefits
• Maintaining constant static pressure minimizes fan operating costs
• Single controller for five systems minimizes installed cost of controls
• Direct pressure measurement provides continuous monitoring
• Audible and visual alarms warn staff of unsafe conditions
• Easy communication to building management system
• Convenient keypad and display support local programming
• Passwords prevent unauthorized access to controller functions
Applications
• Energy efficiency
• Laboratory safety
• Laboratory comfort
SureFlow Adaptive Offset Controller 8681
Product Details
The TSI SureFlow™ Adaptive Offset Controller Model 8681 is an ideal digital controller for laboratories with fume hoods.
A stand-alone device, the 8681 ensures that the exhaust volume is always greater than the supply volume for negative spaces, and less than the supply volume for positive spaces. This negative air balance helps ensure that chemical vapors cannot diffuse outside the laboratory, complying with requirements in NFPA 45-2000 and ANSI Z9.5-2003.
The SureFlow 8681 also controls the temperature of the laboratory space by modulating reheat and the supply air volume. Optionally, a room pressure sensor can be connected to the 8681 controller to correct long-term changes in the building dynamics.
The 8681 uses TSI’s unique through-the-wall pressure sensor to provide closed-loop control of the pressure differential. The pressure sensor slowly resets the offset between the supply and exhaust flows.
The 8681 easily integrates to the building management system using either alarm relays or digital communications. The 8681 supports the open MODBUS protocol.
Features and Benefits
• Stand-alone room pressure control provides system reliability
• Integrates temperature control into laboratory ventilation control
• Flow tracking control ensures stability in the HVAC system
• Direct pressure measurement provides continuous, closed-loop control
• Audible and visual alarms warn staff of unsafe conditions
• Network communications allow for building-wide control efficiencies
• Convenient keypad and display support local programming
• Passwords prevent unauthorized access to controller functions
Applications
• Laboratories with fume hoods
